New energy inductor
Composition of new energy inductor coil:
1. High voltage coil
2. External reinforced insulation layer
3. Support bar
4. Internally reinforced insulation layer
5. Low voltage coil
6. Cooling circular tube
7. Return pipe
8. Liquid outlet pipe
9. Liquid storage tank
10. Water pump
11. Cooling fluid
12. Installation board
13. Fan installation plate
14. Fan
15. Fan leaf
16. Control module
17. Battery
18. Solar panels
The characteristics of new energy inductor coils include a high-voltage coil and an outer reinforced insulation layer connected to the inner side. The hollow inductor coil is equipped with a support strip on the inner side of the outer reinforced insulation layer, and the other end of the support strip is connected to the inner reinforced insulation layer. A low-voltage coil is installed on the inner side of the inner reinforced insulation layer, and a cooling ring tube is installed on the outer side of the low-voltage coil. The upper part of the cooling ring tube is connected to the return pipe, and the lower part of the cooling ring tube is connected to the outlet pipe.
Hollow core inductor coils are mainly used in vehicle charging, door recognition systems, safety systems, adaptive cruise control systems, collision warning systems, as well as communication systems and electronic navigation. To put it simply, its function is to ensure the safe operation of the car by correctly transmitting information to various electrical appliances.
Service Hotline：
18825827211
Customer message
18825827211
